Przejdź do treści
VARILIGHT

Karta katalogowa: EGJM1Y.MW

V-Pro Multiway

Karta katalogowa

EGJM1Y.MW 1-Gang V-Pro Multiway Dimmer 1 x 120W LED

Single V-Pro Multiway Dimmer 1 x 120W LED

Cechy produktu

  • V-Pro intelligent dimming, the industry standard for LED
  • Dims 120W of lighting with no minimum load and no maximum number of lamps
  • Rotary dimming from 2 or 3 switch locations with one or two companion controllers
  • Simply replaces the existing switches, no additional wiring required
  • Smooth, silent dimming with V-Pro technology on board
  • Soft start brings the lights up gently, with intelligent overload protection
  • Push on/off, rotate to dim; settings are saved even after a power cut
  • Screwless low profile faceplate, just 4mm deep with no visible fixings, for standard 40mm round or square European wall boxes

Produkt

Kod produktu
EGJM1Y.MW
Kategoria
LED Dimmers
Seria
European VariGrid
Wykończenie
Matt White
Kolor wkładki / pokrętła
Chrome Knob
Kod kreskowy
5021575042603

Wymiary i montaż

Wymiary
71x71x57mm
Głębokość płytki czołowej
4mm
Rozstaw otworów mocujących
60.3mm
Zalecana głębokość puszki instalacyjnej
Standard European 40mm Round or Square
Masa netto
76g
Masa brutto
78g

Parametry elektryczne

Napięcie robocze
230V 50Hz
Maksymalne obciążenie znamionowe
LED: 120W
Maksymalny prąd znamionowy
1.74A
Zacisk (faza)
3.2mm, capacity 3 x 1.5mm²
Zacisk (uziemienie)
3.3mm, capacity 3 x 1.5mm²

Bezpieczeństwo i zgodność

Przeznaczenie
Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Wskazówki dotyczące bezpieczeństwa
Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload.
Obowiązująca norma bezpieczeństwa
BS EN 60669-2-1
Kod towaru
85365005

Kolekcja European VariGrid

The European VariGrid range lets you create your own combinations of switches, dimmers and sockets on a single screwless low profile faceplate. Made to fit standard round European wall boxes, simply pick a finish and add the modules you want, from Schuko and French sockets to rocker and toggle switches and V-Pro dimmers.

Wykończenie Matt White

With its soft, low sheen surface, Matt White is a calm, contemporary finish that lets the rest of your interior do the talking. Supplied with white socket inserts and polished chrome rockers.

Wszystkie informacje mogą ulec zmianie bez uprzedzenia. Z zastrzeżeniem błędów i pominięć. Zdjęcia mają charakter wyłącznie poglądowy. Poszczególne cechy i kolory mogą się różnić. Najnowszą wersję można ustalić na podstawie daty wydania.
Data wydania: 2026-11-11. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. Wszelkie prawa zastrzeżone.

Podobne produkty

Inne kolory wkładek

Może się również przydać

  • Europejskie puszki instalacyjne do Państwa europejskich płytek: po jednej na każdą płytkę

    YBE.PL 45mm European Wall Box for Plasterboard Walls

  • Europejskie puszki instalacyjne do Państwa europejskich płytek: po jednej na każdą płytkę

    YBE.SD 40mm European Wall Box for Solid Walls

  • LEDFix: pomaga płynnie ściemniać źródła LED

    YAGF LEDFix (for use in conjunction with some LEDs)

  • Sterownik dodatkowy do ściemniania z 2 lub 3 miejsc

    EGJS1Y.MW 1-Gang V-Pro Multiway Companion Controller

Gdzie kupić