Instruction leaflet PDF Additional instructions PDF Watch the video YouTube

Data sheet: EGJP1I

1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W, European VariGrid Iridium (EGJP1I)

Data sheet

EGJP1I 1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W

Name: 1-Gang 2-Way V-Pro Push On/Off Rotary LED Dimmer 1 x 0-120W
Brand: VARILIGHT
SKU: EGJP1I

Single V-Pro Rotary 2-Way LED Dimmer 1 x 0-120W

Range European VariGrid Finish Iridium

Product features

V-Pro intelligent dimming, the industry standard for LED
Dims 0-120W of lighting with no minimum load and no maximum number of lamps
Optimised for dimmable LEDs, no buzzing, no flickering
Silent trailing edge dimming that is gentle on the load
Soft start brings the lights up gently, with intelligent overload protection
Adjustable minimum brightness and a choice of driving modes to get the best from any LED
Push on/off, rotate to dim; settings are saved even after a power cut
Screwless low profile faceplate, just 4mm deep with no visible fixings, for standard 40mm round or square European wall boxes

Product

Product code: EGJP1I
Category: LED Dimmers
Range: European VariGrid
Finish: Iridium
Insert / knob colour: Iridium Knob
Barcode: 5021575951462

Size and fitting

Dimensions: 71x71x57mm
Faceplate depth: 4mm
Fixing centres: 60.3mm
Recommended back box depth: Standard European 40mm Round or Square
Net weight: 76g
Gross weight: 78g

Electrical

Operating voltage: 230V 50Hz
Maximum load rating: LED: 120W
Maximum current rating: 1.74A
Terminal (Live): 3.2mm, capacity 3 x 1.5mm²
Terminal (Earth): 3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload.
Applicable safety standard: BS EN 60669-2-1
Commodity code: 85365005

Declaration of Conformity

European VariGrid collection

The European VariGrid range lets you create your own combinations of switches, dimmers and sockets on a single screwless low profile faceplate. Made to fit standard round European wall boxes, simply pick a finish and add the modules you want, from Schuko and French sockets to rocker and toggle switches and V-Pro dimmers.

Iridium finish

The Iridium Black finish lends an air of sophistication and modernity with its deep, lustrous tone adding a touch of drama to stylish interiors. Supplied with black inserts and matching iridium rockers.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 11th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

You may also need

European wall boxes for your European plates: one each
YBE.PL 45mm European Wall Box for Plasterboard Walls
European wall boxes for your European plates: one each
YBE.SD 40mm European Wall Box for Solid Walls
LEDFix: helps LED lamps dim smoothly
YAGF LEDFix (for use in conjunction with some LEDs)
Replacement module for your V-Pro dimmer
MJP120.EU 2-Way V-Pro Push on Push off LED Replacement Dimmer Module Kit for EU 1 x 0-120W