Instruction leaflet PDF Additional instructions PDF

Data sheet: EGJM1I

1-Gang V-Pro Multiway Dimmer 1 x 120W LED, European VariGrid Iridium (EGJM1I)

Data sheet

EGJM1I 1-Gang V-Pro Multiway Dimmer 1 x 120W LED

Name: 1-Gang V-Pro Multiway Dimmer 1 x 120W LED
Brand: VARILIGHT
SKU: EGJM1I

Single V-Pro Multiway Dimmer 1 x 120W LED

Range European VariGrid Finish Iridium

Product features

V-Pro intelligent dimming, the industry standard for LED
Dims 120W of lighting with no minimum load and no maximum number of lamps
Rotary dimming from 2 or 3 switch locations with one or two companion controllers
Simply replaces the existing switches, no additional wiring required
Smooth, silent dimming with V-Pro technology on board
Soft start brings the lights up gently, with intelligent overload protection
Push on/off, rotate to dim; settings are saved even after a power cut
Screwless low profile faceplate, just 4mm deep with no visible fixings, for standard 40mm round or square European wall boxes

Product

Product code: EGJM1I
Category: LED Dimmers
Range: European VariGrid
Finish: Iridium
Insert / knob colour: Iridium Knob
Barcode: 5021575042535

Size and fitting

Dimensions: 71x71x57mm
Faceplate depth: 4mm
Fixing centres: 60.3mm
Recommended back box depth: Standard European 40mm Round or Square
Net weight: 76g
Gross weight: 78g

Electrical

Operating voltage: 230V 50Hz
Maximum load rating: LED: 120W
Maximum current rating: 1.74A
Terminal (Live): 3.2mm, capacity 3 x 1.5mm²
Terminal (Earth): 3.3mm, capacity 3 x 1.5mm²

Safety and compliance

Intended applications: Indoor Use Only. Domestic lighting circuits including many dimmable LEDs. Do not use masking tape on any decorative products, or install on damp plaster.
Safety advice: Not suitable for use with non-dimmable fluorescent bulbs and tubes, TRIAC dimmable loads, wire-wound or toroidal transformers or electric motors. Do not overload.
Applicable safety standard: BS EN 60669-2-1
Commodity code: 85365005

Declaration of Conformity

European VariGrid collection

The European VariGrid range lets you create your own combinations of switches, dimmers and sockets on a single screwless low profile faceplate. Made to fit standard round European wall boxes, simply pick a finish and add the modules you want, from Schuko and French sockets to rocker and toggle switches and V-Pro dimmers.

Iridium finish

The Iridium Black finish lends an air of sophistication and modernity with its deep, lustrous tone adding a touch of drama to stylish interiors. Supplied with black inserts and matching iridium rockers.

All information is subject to change without notice. Errors and omissions excepted. Images are for illustrative purposes only. Individual features and colours may vary. Refer to date of issue to identify latest version.
Date of issue: 12th November 2026. © Doyle & Tratt Products Ltd, Carylls Lea, Faygate, West Sussex, RH12 4SJ, United Kingdom. All rights reserved.

You may also need

European wall boxes for your European plates: one each
YBE.PL 45mm European Wall Box for Plasterboard Walls
European wall boxes for your European plates: one each
YBE.SD 40mm European Wall Box for Solid Walls
LEDFix: helps LED lamps dim smoothly
YAGF LEDFix (for use in conjunction with some LEDs)
Companion controller, to dim from 2 or 3 places
EGJS1I 1-Gang V-Pro Multiway Companion Controller